Happy in our home.

2/24/2015
We've received a lot of attention recently in regards to our home.  We are proud of our efforts and humbled by the wonderful positive comments we have received.  There are a number of painful lessons we have learned along the way, and I will talk to those in detail when I wrap up this blog at a later date.  In the mean time here are a couple of pictures to celebrate some down time while we wait for stain to dry on the woodwork that's staged in the basement.  Thank you to the fine folks at Deltec who have supported and encouraged us along the way.

2/12/2015 Enjoying Our Energy Efficiency

2/12/2015
It is currently zero degrees Fahrenheit outside, but with the sun shining in our south facing windows, the house is 74 degrees inside.  To put that in perspective, that's a 74 degree difference between inside and outside with no assistance from our Geothermal heat pump.  Gotta love those ten inch super insulated walls in our Deltec.

The view isn't the only thing we appreciate coming in through all those windows.

 

By the time I thought to take this picture, the outside temperature had risen slightly to +4 degrees. We didn't realize at the time, but the outdoor temp/humidity module was failing, so no humidity reading available.  I've since replaced it under warranty and all is working again.

1/14/2015 Recognition

1/14/2015 Recognition

We have worked hard on this house and continue to work hard on it just about every day.  We do it because it's our home and all the sweat equity makes it just that much more special to us.  However, receiving recognition for our efforts, especially from the professionals really just ices the cake.  We have been featured in the 2014 year end wrap-up by Deltec, and appreciate both the quality of their product, and their following up with us regularly.
http://blog.deltechomes.com/deltecs-best-of-2014?utm_source=Month+in+Review+January+2015+-+Best+of+2014&utm_campaign=Jan2015-Year+in+Review&utm_medium=email

Happy New Year from The Farm With A View.

1/7/2015 Life in the North Woods

1/7/2015

Life in the North Woods has its upsides and its downsides.  However we wouldn't trade any of it for anything.  It just requires a different level of effort.  As of this writing, it is -10 degrees and a wind chill of 20-30 below zero.  Now, if I could just figure out a way to enclose and heat that cab.....We have a fire going and sun streaming in the windows, so the temperature inside is a summer like 74 degrees (and the heat pump hasn't run for the last couple of days). Those ten inch walls and super dense pack insulation have us toasty warm and comfortable.

12-26-2014 More interior milestones completed

12-26-2014
We gave ourselves a couple of Christmas presents that would have been very difficult to gift wrap this week.  Two major interior completions have put us tantalizingly close to being able to say the house is done.  First and most importantly I finally finished the walk-in shower in the master bath.  We changed plans on the style, since it had been so long from initial planning, which meant I had to return all the subway tiles (boxes and boxes of them!), and Debra chose the color pattern we had used throughout both bathrooms for continuity in the design.  I chose to go with a larger 12X12 format for ease of installation and to give a little contrast to the 6X6 used in the rest of the bathroom.  All tile, grout, and sealing have been done and after the appropriate seven day curing process the first use of the shower was on Christmas day.  What a feeling!  The glass door is not on yet (ordered and not arriving till later in January), so we have a temporary shower curtain being put to use.  The other item was the tile back-splash for the kitchen.  We had the counter tops installed without integral back-splash because we knew we were going to tile.  We just didn't realize at the time it was going to take so darn long.  We used a 9X12 base tile with 1X2 glass and stone mosaics, all in neutral earth tones for contrast.
Now, the only thing left to do for a finished house is lots and lots of staining and trim installation.  Here on the day after Christmas we are again pulling out the tools and continuing that process.  We both look forward to a day when we can plan on participating in some of our long ignored hobbies and pastimes that have fallen by the wayside since starting this whole building process.

All the stress and mental anguish worrying about how this project would turn out have finally ended.  The concrete floor/base that I was losing sleep over, turned out perfect, in that it is smooth, consistent, and properly drains from all directions.  The little shampoo/soap niche that was so difficult to work on also turned out great.  All in all, the hard work and worry payed off with a shower we are proud of.

The back-splash went much smoother than expected.  I had never tried cutting glass tiles before, so that was a new skill requiring great care to prevent chips and exploding tiles (don't ask).  The proper blade for the tile saw helped immensely.  One challenge we hadn't expected was how our cabinets aligned with the outlets.  The outlets were measured and installed a specific distance from the floor all around the kitchen.  If you have seen the cabinet install portion of this blog, you know the kitchen floor varied by as much as an inch and a half from level from one side to the other.  Because we installed all the cabinets with levelers it appeared that the outlets were misaligned when we started tiling.  This required some creative processes as we went to mask the difference.  The process turned out well, and is nearly impossible to notice, and only then if you are looking hard in the right places.

This is something that has been important to us from the start of the whole build.  Look closely at the top of the back of this tile.  We went out of our way whenever possible to put Made In The USA materials in this house.  We're happy to say every piece of tile in the house was made by this company, and we couldn't be happier with the product.  Sometimes it cost us a little extra, and surprisingly when you researched hard enough, we found we could get quality Made In The USA materials for less than the "stuff" coming from the Asian markets.  The same with any new tools I picked up along the way.  It was that important to us.

A little side project we took on was this portable(?) structure to keep the tractor and some of our other outside equipment out of the weather for the winter.  We just couldn't afford the pole building we were hoping to build this past Fall for storage, so this will have to do for another year or two.

Merry Christmas from "The Farm With A View"

11/6/2014 Farm with a view

Let the sun shine in!

10/25/2014 The outside is done!

10/25/2014
With the exception of our landscaping project, the outside of the house is considered done.  There are tiny details to attend to, but nothing that requires vast planning or resources.  The chimney race was one of those projects that just always seemed to get pushed off to the back burner in favor of things we deemed more pressing.  However, once completed, seemed to make a huge difference in the appearance of the whole house.  The process was not as hard as we (ok, as I.) thought it would be.  Debra had more faith in it being an easy project than I did. The only thing that slowed us down was the need to acquire some good sturdy commercial scaffolding.  Installing those panels would have been difficult at best, and damned dangerous at worst if we had done them from our ladders.  Good timing too, as the Fall weather is getting less and less pleasant to be outside working in.  Now we are moving back inside to finish the last of the interior details so as to call the house complete.  But as anyone who has ever built a house knows, you are never truly "done".

Before.

During.

Debra handling the panel cutting.

Me, thinking how nice it will be to not have to work in high places anymore.

After. 
It turned out looking better than even we thought it would.

.

10/3/2014 More Outdoor Completions

10/3/2014  More outdoor completions
We've gotten a few more days of nice weather lately, so have been working hard to complete outdoor projects.  There won't be many more nice days with the cold bearing down on us, so we are motivated.  The retaining walls was a project we had originally intended on doing ourselves (we have prior experience), but decided with our time and weather constraints to have it done professionally.  The final product makes us glad we did.  Our landscaper managed to jump in and finish the two retaining wall projects before he had to leave for other jobs.  He has been working hard to make up for all the rain days he has been delayed with too.  Unfortunately he will not be able to come back and do our actual landscaping until next Spring.

Debra and I have managed to complete about 60% of the exposed basement stucco finish, and now that the walls, landscape fabric, and french drains have been installed, hope to finish the rest as soon as it stops raining again  (we've had 1 3/4 inches just since last night).  We also had our downstairs bedroom escape window well installed and back-filled simultaneously with the new retaining walls.  When the rain pushed us back inside, we worked at insulating our interior garage walls, and staged the attic insulation bundles where we can work on them our next rainy weekend.  Our next non rainy weekend we will finish the basement stucco and install the storm door on the exit from our master bedroom to the back deck. 

Digging out for the wall foundation.  We had placed plywood and straw bales here previously in a (somewhat futile) attempt at holding back the mud and dirt from the lower patio.

Foundation laid and first course of stone going in.

Newly completed wall with two french drains installed above to capture and drain away any water that flows down the hill and under the deck.  The one drain can still be seen near the end of the wall, but that will be extended out further away from the house and buried when final landscaping is done.

Here is the wall on the opposite side of the lower patio.  We didn't have the drain challenges we did on the other slope, but there is a french drain installed anyway to preclude any possibility of water encroaching beyond the wall and onto the concrete.  You can also see where we left off with our first coat of stucco where the wall joins.

This is the beginning of the stucco process.  First the pink styrofoam insulation is washed and scored (texture roughed up with a stiff brush).  Then a sticky fiber mesh screen is applied.

Next a very thin first layer of stucco is applied and allowed to dry.

Debra proved to be the more talented (and patient) applier of the first coat of material.

After the second coat is troweled on, we get our desired texture.  This product will allow rolling, troweling, brushing or "brooming", and limited spraying of the product to achieve the final finish you desire.  We chose the natural adobe look by doing our final coat with the trowel.

No more pink insulation!  Final landscape work will mound more dirt up against the foundation and hide any small bits of pink down near the soil line.

I also spent about a half a day on the ladder installing gutter screens.  Last year the gutters filled to overflowing with leaves and cause all manner of drainage issues.  Just a minor downside to living amongst the trees.

 

We picked up an old industrial Massey Ferguson tractor to work here on "The Farm With A View".  I outfitted it with forks on the bucket and have been using it to haul our firewood.  It will also be equipped with a back blade and be our snow clearing device for the driveway this winter.

From forks to the saw-buck in one motion.  No lifting.

There will be two more rows like this when finished.

9/2/2014 Finally an outdoor completion

Weather delay after weather delay, but we've finally completed one  outdoor task that we've been attempting for weeks.  We've had a very rainy summer this year, and we needed at least a small window of dry and not very windy weather to complete our deck staining.  Well, one out of two is the best we could do.  It was a very windy day, and we almost didn't make it because of rain.  The weather changed and the rain arrived hours before it was forecast to.  Luckily the thunderstorms formed on both sides of us and rolled north without leaving a drop behind until much later that night.  By then the stain was sufficiently dry to stand up to the moisture.  It took more prep time than we had to spare too because of the wind, but necessarily had to be done.  Debra and her grandson did most of the paper and tape to protect the siding and our lower patio from over spray and drips, while I set up the spray equipment and cleared the deck of all furniture.

The disappointing news is, our local landscaper (who has also been negatively affected by all the rain) has been pushed so far back, that we most likely will not get our ground work done before next spring.  It looks like one more Winter of weeds and mud around the house.  He did promise to come back and complete the two retaining walls we need by our lower patio before Fall.  At least we'll be able to stop the erosion and mini mud slides we've been experiencing down on the lower level.

The equipment that saved us days of brush and roller work.  This is the same spray equipment we used to paint the whole interior of this house, and the exterior of a little bungalow we refurbished several years ago.  Good equipment is worth the expenditure when you really need it.

You can see the paper and tape we used to mask the house.  The chimney is still Tyvek, so we didn't care if it got stain on it.  We're covering that with faux rock anyway.  Including the deck on the back of the house, we did around 800 square feet of deck and railing stain in a little more than a day.

Or view to the southwest now that we have cleared the necessary trees and brush.  We LOVE our little piece of paradise!

6/16/2014 Another Completion

6-16-2014 
Another completion on the exterior for us to mark off.  This comes off the door at the back or our master suite, and will eventually open on to a small patio behind the house.  One of our local contractors did a beautiful job so we could free up our time for the interior trim.  This deck was done properly and will require no further attention from us, other than staining.

We continue to chip away at the trim and woodwork on the interior, intermixed with our regular jobs.  Both of us have been spending extra time at work, making less time available to work on the house.  Plus we have started dividing time with our old house in an attempt to get it ready for sale as quickly as we can.  The sale of the other house will release both funds and considerable stress and allow more time to dedicate to this one.

We still have more fill dirt to bring in, which will raise and level the ground at the base of the stairs. 

5/1/2014 Tedious, but necessary steps

5/1/2014


We're still moving forward, but the time spent vs. progress shown has dropped off significantly.  I read somewhere once that when building a house, the last ten percent takes ninety percent of your time.  I'm certainly a believer now.  We are now down to the final interior details of doors, trim, casings, and baseboard.  This requires a LOT of staining since we are doing everything from scratch in order to get the exact color we want.  There aren't too many things I hate more than painting, but staining is one of them.  Luckily we do well at sharing responsibilities, so Debra has taken on all the staining, and I have been doing the cutting, staging, and final two coats of poly.  This week I'll start cutting in the door hardware and nailing up casings and hanging doors as they are complete.  As soon as we get this task under control, we'll order trim and baseboard material.  Soon we should have another set of pictures to show distinct progress.

Here's just a portion of what has taken over our basement while we stain and prep.

3/6/2014 Interior stonework complete

3/6/2014

Stonework finished, cleanup done, and once again we are able to use our fireplace.  Since for all appearances this Winter is going to last until early July, that's a good thing. 
This proved to be the hardest project we've had to work on together, and have sworn that going forward, all future stone work will be done by a professional.  Now we can get back to finishing details like the master shower, staining trim, casings, and doors, and finishing the details on the stairway leading to the basement so the carpet installers can return to finish that last little bit.  We need to accelerate these items because when the weather does finally break, we are not going to want to stay inside working.  There are a number of exterior details that are waiting for decent temperatures before we can tackle them.  Stucco on the exposed basement foundation, staining all that deck, and installing the escape window well in the lower level bedroom.  No, I don't think we will ever be completely done with the house.  At least it seems that way some days.

Finally, we're able to have a fire again after finishing all the stonework.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

17 turkeys in the road a couple hundred yards below our driveway this morning.

2/10/2014 Stoning our house

2/10/2014

Some visual progress, but with some more tough lessons.  Stone masonry is a skill that neither Debra nor I have any experience with.  Of course having no experience with something has historically caused us to take that as a challenge.  Another case of what we thought would be a weekend job, of course turns into something much more.  Lesson learned:  cement eventually loses it's adhesive properties even if it appears wet enough to continue its work.  Results?  We were half way up the rock wall surrounding our fireplace when one of the heavier stones dislodged itself and dropped down, causing a cascade failure of just about everything below it.  We lost half a day or more clearing up the mess and starting over.  Not fun, but lesson well learned.  Take things a little slower until you're sure of your skills, and carefully time your product so as not to over reach its or your capabilities.

Our starting pallet and a clean slate.

So far, so good.

We made it up to the base of the mantle before the top stone collapsed down and obliterated the rest.

Recovery from our accident and progress again being made.  I love visual progress!

1/ 7/ 2014 Break Time's Over

1/ 7/ 2014

Well, we decided to step back and get away from construction for awhile.  I'm afraid I was burning out from the stress of constantly spending every waking minute of my spare time (that time away from my regular job) working on this place.  Debra was catching on to the fact that I was starting to adopt a "that's close enough" attitude with my work on the house, and you could start to see it in my attention to detail.  That's definitely not my style, so once it was pointed out to me I agreed, regardless of how much we have to do we needed to have some "us" time away from construction.  Well, now that the holidays are over, I need to get myself motivated to get at it again.  We started by getting our fireproof stairs installed in the garage so we could access the attic storage area.  This in turn will allow us to start sorting boxes in the basement and clearing that space out.  I really hate cutting large holes in my house.  It seems to have a permanency that makes me really really uncomfortable.  There were numerous measurements and double checking measurements to be certain that great gaping hole in the garage ceiling was going to be a perfect fit.  Everything slid in perfectly, so the extra effort was worth it.

Settling into the house to actually live here now really doesn't help my motivation either.  It's just too comfortable and easy to take a break and have a snack, or step over to the computer to see what the latest is on Facebook, etc.  Those habits I really need to work hard to overcome.

We are especially enjoying our fireplace now.  Currently we are experiencing record or near record low temperatures here in Wisconsin.  The last couple of nights have been -25 degrees with wind chills of between 40 and 60 below zero.  Our super insulated house and our high efficiency fireplace will keep the whole upper living area between 70 and 74 degrees without any help from our geothermal system.  I have a gas powered log splitter that I use for larger amounts of firewood, but the temperature was so cold earlier this week that I could not get it started.  The alternative was to do it the way I used to on the farm.

These stairs have a fireproof barrier on the outside and a fusible gasket around the opening.  Should a fire break out in the garage, the gasket will melt and seal the opening, while the fireproof outer layer holds back the flames.  None of our big box stores carried anything like this, so it had to be special ordered.

When technology and/or automation fail, I do it like my father taught me and pick up the 8 pound Hammer of Thor, and get it done.  This will keep our fireplace fed for quite awhile.

I had a friend take this picture for me.  This shows more of how our Deltec blends with nature.  The house sits right at the edge of the ridge line, so the view out all those windows is something to behold.

11/25/2013 What next?

11/25/2013

The big news from "The Farm With a View" is we have been given our occupancy permit from our local building inspector.  The visit went very well, and we were more than pleased by all his compliments on our work and craftsmanship.  That made so many of those late nights and long weekends feel much more worth it.  We now are in the process of not only continuing to work on it, but are moving household goods in while trying to clean out the old house. 

Sometimes I think the main purpose for building our own house is to serve as an example to others, how many things can possibly go wrong.  Previously I mentioned how as we were about to hang our microwave/range hood, we discovered that HVAC had mounted the vent duct too low in the wall.  After a little work, we opened the wall, corrected the too short duct, and sealed everything back up.  Last night we went to finish the installation.  Wall patched, holes drilled, brackets mounted, and finally appliance neatly hung in place.  It was beautiful.  I had even set the clock to the correct time.  Then I opened the door........or at least that was what I tried to do.  It only opened about 4 inches before it contacted the cabinet frame, where it stopped.  Yup, our cabinets were designed to make the microwave look built in, with panels that went down the full length of both sides.  It looked so built in that there was no room for the door to swing.  So, back to square one with removing the bolts, dropping the appliance back down and removing it from its frame.  After a short brainstorming session, we went back and made the appropriate marks, and with the help of one of my Dozuki saws and a straight edge, cut down the offending panel.  A small piece of trim matched perfectly with the newly sawn edge, plus a little stain to blend, and we went for attempt three.  This time it was a success, and the results are gorgeous.  Unless we confess as to the modification (which I believe is what I just did), you would not be able to tell the cabinets were not designed this way on purpose.

On to the finishing touch for our night.  The only spaces in the house that we were going to carpet were our walk-in closet, and the stairs going to the basement.  We decided at the last minute to also carpet the small (8X12ish) entry leading from the base of the stairs into the main basement.  Off this little entry area is the door to our cold storage room (also known as "the storm bunker").  Since the carpet was now going to run right up to this entrance, we decided we had better install the door before the carpet layers came the next morning.  What should have been a thirty minute job went two hours.  The contractor that did our rough work made the opening too tall, too wide, and slightly out of square, requiring us to build a new header and work much harder at installing than it should have been.  Imagine our consternation when the carpet layer arrived today and very nicely suggested we remove the door and redo it, only 3/8 inch higher.  His reasoning was sound because the exterior grade door leading into the room had a very low flat sill, and the carpet would have been higher and left a natural channel for dirt and debris to gather.  Since we want everything to be right and not cause us to have regrets later, we will be removing and starting over with the door this week.  The carpet layer will be back at a later date when we finish with the door and some trim that we need to finish around the stairs.

The end result after many many hours.

Here is the area we had to cut away and modify.

11/19/2013 More tile

11/19/2013

I think if I had a choice, (and only if there are no timeline pressures) I would much rather tile than paint.  We're finally down to the last portion of the house that needs tile, and we saved the biggest for last.  We (Debra?) decided in the 11th hour that our master bath would look better with the walls around the tub tiled all the way up to the window, and on three walls instead of just the back splash border we had originally planned on.  I resisted as much as I thought was safe, but ultimately gave in to some one who obviously has way more decorating sense than I do.  Now that I see what the finished product is going to look like, I'm very glad I did.  Although she did give me full permission to pick the rest of the bathroom finishes, I know I will never hear the last of some of my choices.;-)  Today I will finish the remaining two walls around the tub and get our access panel cut below the tub, prior to tiling the front.  Not sure if I'll finish all that today or not, but that is the plan.  After that, the biggest project of all, the walk-in shower.

Two  steps forward, one step back.  We were in the process of mounting our microwave/range hood the other day, when we discovered, much to our dismay, that HVAC  had mounted the external vent duct about four inches too low. :-(  The only way to tackle that was to open up the wall, add an extension, and close everything back up again.  Very disappointing, but what can you do?  We tried to think of any work-arounds to it, but in the end knew the only way to do it right was to tear it out and redo it.

Still need to finish two walls to the left and the front of the tub.  Then grout and move on to the the walk-in shower.

Cutting that hole in the kitchen wall (even though it will be hidden behind the microwave/hood) was a painful step.

Still needs grout, but almost complete.

Turned out better than we had hoped.  Am glad Debra overcame my objections on this tile job!